Supermicro Storage Server SSG-6048R-E1CR36L 4U DP

Key Features

1. Dual socket R3 (LGA 2011) supports
Intel® Xeon® processor E5-2600 v3
family; QPI up to 9.6GT/s
2. Up to 1TB ECC DDR4 2133MHz;
16x DIMM slots
3. 1 PCI-E 3.0 x16, 6 PCI-E 3.0 x8
(slot 1 & 2 occupied by controller
and JBOD expansion port)
4. Dual 10GBase-T LAN w/ Intel® X540
5. 36x 3.5" Hot-swap SAS3/SATA3 drive
bays (24 front + 12 rear); 2x 2.5"
optional Hot-swap drive bays (rear);
4x 2.5" internal fixed drive bays
6. SAS3 via LSI 3008 controller; IT mode
7. Server remote management: IPMI 2.0
/ KVM over LAN / Media over LAN
8. 7x 80mm middle cooling fans
9. 1280W Redundant Power Supplies
Platinum Level (94%)

Product SKUs

SSG-6048R-E1CR36L
SuperServer 6048R-E1CR36L (Black)

Motherboard


Super X10DRH-iT

Processor/Cache

CPU
Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP) *
Dual Socket R3 (LGA 2011)
Cores / Cache
Up to 18 Cores / Up to 45MB Cache
System Bus
QPI up to 9.6 GT/s
Note * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.

System Memory

Memory Capacity
16x 288-pin DDR4 DIMM slots
Up to 1TB ECC LRDIMM, 512GB ECC RDIMM
Memory Type
2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes
RDIMM: 32GB, 16GB, 8GB, 4GB
LRDIMM: 64GB, 32GB
Memory Voltage
1.2 V
Error Detection
Corrects single-bit errors

On-Board Devices

Chipset
Intel® C612 chipset
SAS
SAS3 (12Gbps) via LSI 3008
IT mode firmware
SATA
SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
ASPEED AST2400 BMC
Network Controllers
Intel® X540 Dual Port 10GbE
Virtual Machine Device Queues reduce I/O overhead
Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics
ASPEED AST2400 BMC

Input / Output

LAN
2x RJ45 10GBase-T LAN ports
1x RJ45 Dedicated IPMI LAN port
USB
2x USB 3.0 ports (rear)
2x USB 2.0 ports (rear)
1x Type A
VGA
1x VGA port
Serial Port / Header
1x Fast UART 16550 port / 1 Header


Chassis

Form Factor
4U Rackmount
Model
CSE-847BE1C-R1K28LPB

Dimensions and Weight

Width
17.2" (437mm)
Height
7" (178mm)
Depth
27.5" (699mm)
Weight
Gross Weight: 102.5 lbs (46.4 kg)
Net Weight: 65.5 lbs (29.7 kg)
Available Colors
Black

Front Panel

Buttons
Power On/Off button
System Reset button
LEDs
Power status LED
Hard drive activity LED
2x Network activity LEDs
System Overheat LED
Power fail LED

Expansion Slots

PCI-Express
1x PCI-E 3.0 x16 slot
6x PCI-E 3.0 x8 slots
Slot 1 & 2 occupied by controller and JBOD Expansion Port

Drive Bays

Hot-swap
36x 3.5" Hot-swap SAS3/SATA3 drive bays
Double-sided: 24 front + 12 rear drive bays
Optional
2x 2.5" Hot-swap HDD bays (rear)
Fixed internal Drive Bracket supports 1x 3.5 or 2x 2.5" devices

Backplane

SAS3/SATA3 single expander per backplane

System Cooling

Fans
7x 80mm middle cooling fans
Redundant cooling

Power Supply with Digital Switching Control & PMBus 1.2
1280W High-Efficiency (95%+) power supply
AC Input
1000W Output @ 100-140V, 12-8A, 50-60Hz
1280W Output @ 180-240V, 8-6A, 50-60Hz
DC Output
1000W: +12V/83A; +5Vsb/4A
1280W: +12V/106.7A, +5Vsb/4A
Certification Platinum Level Certified95%+
Platinum Certified
[ Test Report ]

System BIOS

BIOS Type
128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
Plug and Play (PnP)
APM 1.2
PCI 2.2
ACPI 1.0 / 2.0
USB Keyboard support
SMBIOS 2.3
UEFI

Operating Environment / Compliance

RoHS
RoHS Compliant
Environmental Spec.
Operating Temperature:
10°C to 35°C (50°F to 95°F)
Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
Operating Relative Humidity:
8% to 90% (non-condensing)
Non-operating Relative Humidity:
5% to 95% (non-condensing)