Ubiquiti Control a vehicle gate using the connected Intercom and authorize gate access with License Plate Unlock when pa

Control a vehicle gate using the connected Intercom and authorize gate access with License Plate Unlock when paired with a compatible Protect AI camera*.



(1) Gate Hub





(1) Intercom





(1) PoE++ adapter





(2) 2-wire PoE extenders



UA-Hub-Gate

Mechanical

Dimensions 175 x 126 x 26 mm (6.9 x 5 x 1")

Weight 460 g (1 lb)

Enclosure material Polycarbonate

Mounting Din-rail (Included)



Hardware

Networking interface (5) 10/100/1000 Base-T

Power method PoE++

Max. power consumption Without PoE output: 22W

With PoE output: 50W

PoE input 50V DC, 1A

PoE output PoE passthrough, (4) PoE, 50V DC, Max. 28W

Button (1) Factory-reset

Digital input Gate exit request, gate position, side door exit request, side door position, emergency

Dry output relay (2) Operator: rated 30V DC, up to 1A

(1) Aux: rated 30V DC, up to 1A

Powered output relay Side door lock: 12V DC, up to 1A

Operating environment Indoor use only with device itself

Outdoor use with waterproof junction box

Ambient operating temperature -30 to 60° C (-22 to 104° F)

Ambient operating humidity 5 to 90% noncondensing

Certifications CE, FCC, IC



LEDs

PoE in Steady white: Pending adoption

Steady blue: Adopted, device is ready

Blinking white/blue: Upgrading firmware

PoE out Off: Not connected or no data link

Steady white: Connected and data link on

Input terminals Off: No wire

Steady white: Wire connected

Blinking white: Active signal

Output relays Off: No wire

Steady white: Wire connected

Blinking white: Relay triggered





UA-Intercom

Mechanical

Dimensions 324.8 x 113.7 x 28.3 mm (12.8 x 4.5 x 1.1")

Weight Device: 965 g (2.1 lb)

Bracket: 445 g (1 lb)

Enclosure material Aluminum alloy, UV-stabilized polycarbonate, glass

Mount material Powder-coated stainless steel

Mounting Wall mount, adapter to the gooseneck pedestal (Included)

Surface angle mount, flush mount (Optional)

Sunshield kit (Optional)

Weatherproofing IP65



Hardware

Networking interface (1) GbE RJ45 port

Connectivity Bluetooth 4.2

NFC

Power method PoE

UL 294 Power-limited Class 2 PSU

UL 60950-1/62368-1 LPS/PS2 PSU

Supported voltage range 48V DC

Max. power consumption 13W

ESD/EMP protection Air: ±15kV, contact: ±8kV

Sensors Proximity sensor

ALS sensor

Camera 3264 x 2448, 8 MP

H: 79.4°, V: 97.5°, D: 118.2°

Display 177 mm (7") diagonal

Resolution 1024 x 600 (16:9)

Display luminance Max. 1000 nits (typical)

Touch screen technology Capacitive multi-touch

Microphone Yes

Speaker (1) 4 ohm, 2W

LEDs (1) LCM low temperature indicator: orange (LCM turned off when it’s below -25° C but the system funtions normally)

(1) LED floodlight

(13) Keypad LED backlight

Button (1) Factory-reset

NFC frequency 13.56 MHz

NFC read range < 30 mm

NFC standards ISO 14443A, 14443B, 15693

NFC technology NFC Tag 1,2,3,4,5

MIFARE Classic

MIFARE Plus

MIFARE Ultralight

MIFARE DESFire

Ambient operating temperature Device: -30 to 60° C (-22 to 140° F)

Display:* -25 to 60° C (-13 to 140° F)

*The display will turn off when the ambient temperature is above/below the display operation temperature, but other functions will remain functional. (Effective after firmware v 1.0.66)

Operating environment Outdoor use

Ambient operating humidity 5 to 90% noncondensing

Software information The software version of a product can be checked at https://unifi.ui.com

UL 294 level Destructive attack: Level I

Line security: Level I

Endurance: Level I

Standby power: Level I

UL 294 statement Compliance with IEEE 802.3 specifications was not verified as part of UL 294.

The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.

PoE cabling requirements Cable 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site.

The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm 2 ) for patch cords; 24 AWG (0.21 mm 2 ) for horizontal or riser cable.

CAN/ULC-60839-11-1 Grade Grade assignment: I

Certifications CE, FCC, IC, UL 294, CAN/ULC-60839-11-1

Document number, and issue date and/or revision level UA-Intercom, V01





UACC-Extender-2Wire-PoE-Tx/Rx

Mechanical

Dimensions 40 x 105 x 25 mm (1.6 x 4.1 x 1")

Weight PoE in: 77 g (2.7 oz)

PoE out: 79 g (2.8 oz)

Enclosure material Polycarbonate

Mounting material Polycarbonate



Hardware

Networking interface (1) 10/100 MbE

(1) Homeplug AV

Power method PoE++

Max. power consumption 3W (Without PoE output)

PoE input (1) PoE++, 50V DC, Max. 1.2A

PoE output (1) PoE+, 48V DC, 0.72A

ESD/EMP protection Air: ±8kV, contact: ±4kV

LED White

Ambient operating temperature -10 to 40° C (14 to 104° F)

Ambient operating humidity 5 to 95% noncondensing

Certifications CE, FCC, IC





U-PoE++

Specifications

Model U-PoE++

Dimensions 106 x 63 x 34 mm (4.2 x 2.5 x 1.3")

Weight 210 g (7.4 oz)

Output voltage 48V DC @ 1.25A

LAN activity indicator No

Gigabit LAN port Yes

Remote reset capability No

Reset button No

Rated voltage 100—240V AC @ 50/60Hz

Input current 1.3A @ 120V AC

0.75A @ 230V AC

Inrush current <100A peak @ 120V AC

<200A peak @ 230V AC

Efficiency 85+%

Output ripple 1% max.

Switching frequency 65 kHz

Line regulation ? 1%

Load regulation ? 3%

2-pair powering No

4-pair powering Pins 1, 2, 4, 5 (+) and 3, 6, 7, 8 (-)

AC connector IEC-320 C6

Data In / PoE RJ45 shielded socket

Surge protection Difference and common mode

Clamping protection 11V data, 60V power

Max. surge discharge 1500A (8/20 µs) power

Peak pulse current 36A (10/1000 µs) data

Shunt capacitance <5 pF data

Response time <1 ns

Power method Universal AC input, 100—240V AC, 50/60 Hz

Power supply AC/DC

Supported voltage range 100—240V AC

Max. PoE+ wattage per port by PSE 60W

Ambient operating temperature 0 to 40° C (32 to 104° F)

Storage temperature -30 to 70°C (-22 to 158° F)

Ambient operating humidity 10 to 95% noncondensing

Certifications CE, FCC, IC, UL, UKCA, KC, CCC, KC, RoHS