Ubiquiti UniFi switch USW-Industrial 10x1000Mbps POE++ (430W)

Technical Specifications



Mechanical

Dimensions  254 x 235 x 60 mm (10 x 9.3 x 2.4")

Weight  3.9 kg (8.5 lb)

Enclosure material  Die-cast aluminum with black powder coated finish

 

Hardware

Management interface  Ethernet In-Band

Networking interface  (10) GbE RJ45 ports

PoE interface  (8) 60W PoE++ (Pair A 1, 2+; 3, 6-) (Pair B 4, 5+; 7, 8-)

Total non-blocking throughput  10 Gbps

Switching capacity  20 Gbps

Forwarding rate  14.88 Mpps

Power method  Universal input, 100—240V AC, 6A Max., 50/60 Hz

Power supply  AC/DC, internal, 450W

Supported voltage range  100—240V AC

Max. power consumption  20W (Excluding PoE output)

Total available PoE  430W

Max. PoE wattage per port by PSE  PoE++: 60W

Voltage range PoE mode  PoE++: 50—57V

ESD/EMP protection  Air: ± 24kV, contact: ± 24kV

Shock and vibration  ETSI300-019-1.4 Standard

Ambient operating temperature  Internal AC/DC @ 450W: -40 to 50° C (-40 to 122° F)

Internal AC/DC @ 240W: -40 to 60° C (-40 to 140° F)

Ambient operating humidity  5 to 95% noncondensing

Certifications  FCC, IC

 

Switching Features

Layer 2 features 

IGMP snooping

STP / RSTP with priorities and port-level disable

Port isolation

Storm control

Voice VLAN

Port mirroring

LACP port aggregation

Multicast / broadcast rate limiting

MAC address blocking

Flow control

802.1X control

Jumbo frames

Proprietary loop protection

DHCP snooping / guarding

Egress rate limit

LLDP-MED

Port restricted by MAC



LEDs

System Status

Ethernet PoE

Speed/link/activity